So my wife had an idea for a coffee table and I said, I can do that.
I searched craigslist for a solid wood door and for free, old tables that had spindle legs (though I found this one in an alley). Then:
-Used a miter saw to cut the legs to length (we wanted the legs + the width of the door to be 18" high)
-Drilled two pocket screw holes in each table leg (you can get a pocket screw jig for $20 at Lowes or Home depot)
-Used self-tapping screws to attach each leg to a corner
With our $20 budget, it beats what we could buy at Ikea. :) Photo attached.